Canopy & Dog Box Installation Kit
Description
Make installation a breeze by adding our Canopy & Dog Box Installation Kit from Australian Performance Boxes. Our installation kit provides everything you need for a secure and stable fit, ensuring that your canopy and dog box remain firmly in place.
Whether you're transporting your beloved pets or protecting your gear, the Canopy and Dog Box Installation Kit ensures easy assembly and stability. It includes all necessary bolts, washers, and nuts, streamlining the installation process so you can spend more time on the road and less time in the garage.
What's in the Kit
- 4 x M10 100mm Hex Head Bolts
- 4 x M10 Hex Nyloc Nut
- 8 x 37mm Zinc Plated flat washer
4.9 Stars from 190+ Reviews
8000+ Vehicles Upgraded
12 Month Warranty
Australia-wide Freight
How to Install Your Canopy or Dog Box
Make installation easy by using our Canopy & Dog Box Installation Kit. It’s designed to provide your setup with a secure, stable fit.
Please Note: Australian Performance Boxes does not offer an installation service. This kit is designed for DIY installation. Please read the instructions carefully, or consult a professional if you’re unsure.
What’s in the Kit?
- 4 x M10 100mm Hex Head Bolts
- 4 x M10 Hex Nyloc Nuts
- 8 x 37mm Zinc-Plated Flat Washers
Ensure this product is suitable for your ute tray by confirming the following measurements: headboard height, tray width (including the distance between any side gunnels), and tray length.
Why Use the Kit? Our Installation Kit provides all the high-quality hardware you’ll need for a strong, lasting fit. It saves you time and gives confidence in your setup, wherever you travel.
Need Help? If you have questions or need advice about the installation process, contact the Australian Performance Boxes team.
Installation Instructions
1. Position, Mark & Drill:
Place your canopy or dog box onto your ute tray. Ensure it’s square and in your desired position. Mark where you need to drill through the product, and drill through the false floor of the product and into the tray at your marked position.
Tip: For maximum strength and stability, we recommend drilling through the SHS (Square Hollow Section) framing. If this isn’t possible, bolts can be positioned near the product’s corners. You can locate the underfloor frame by referencing the roof frame or in line with the vertical supports front to rear at the end of the jack-off points.
2. Fit the Bolt Assembly:
For each hole slide a 37mm flat washer onto each M10 100mm bolt. Insert the bolt down through the floor and through the tray. Secure with washers and nuts underneath the tray, add a second 37mm washer to the bolt end. Thread an M10 Hex Nyloc Nut onto the bolt and tighten securely.
3. Final Check:
Double-check all four bolts and nuts. Ensure everything is tight and the canopy or dog box is secure.
Let customers speak for us
